Timer mode
This mode allows for water heating during specific periods of the day or night and allows with
menu buttons to select water heating by heat pump in sub-mode
“HP”
; by heat pump and
electric heater in sub-mode
“HP+EL”
; or by electric heater alone in sub-mode
“EL”
. The
beginning, and correspondingly end of operation period, is indicated in the display right side.
Initial time is displayed when the operation has still not begun, while after beginning is displayed
the end time.
Boost mode
This mode is for rapid water heat and combines heating with the heat pump and electric heater
in full power in order to reach quickly desired hot water temperature. The maximum water
heating temperature in this case is 55°
С
, combined operation ending at 45°
С
and then
additional heating only by the heat pump.
In all modes of operation the field
Measured or set parameters
provides useful information
about measured parameters which are not displayed on the main screen, as well as for some
operational pre-set system parameters. All registered data may be displayed in sequence by
pushing the button
View/Enter
. The display sequence is as follow:
Temperature set
Water heater bottom temperature
Temperature before and after the outdoor defrost unit
Date
Anode protector state indicator
Daytime rate consumed power
Night-time rate consumed power
Start of daytime tariff
Start of night-time tariff
Start of first interval for heater operation
End of first interval for heater operation
Start of second interval for heater operation
End of second interval for heater operation
21
