list of options to choose from, then button
▲
provides for selecting next one, while button
▼
–
for the previous one, if any.
• When some of control settings have changes, then pressing button F shall confirm the
changes and the controller returns to initial position. When the settings on the screen display
have not been changed, then pressing F shall allow passage to next settings screen. If however
this has been the last setting, then the controller returns in initial position.
• If not buttons have been pressed, then after certain time controller shall return to initial position
and any changes made in current screen settings shall be ignored.
SCREEN MENUS IN SETTINGS MODE
Change of temperature set
:
When the water heater is switched on then pressing one of the buttons
▲
or
▼
shall allow
passage to change the temperature set. Any further pressing of one of the buttons shall allow
changing the temperature set in desired direction. Pressing the button View/Enter shall archive
the new value set and the screen shall return to normal mode. If by 5 seconds no new button is
pressed then the changes made are not archived and the screen returns to normal mode. If one
of the buttons
▲
or
▼
is held over 0.8 sec., the value of temperature set increases or
decreases accordingly with three units per second.
Active Heat Sources:
• only the heat pump (mode HP);
• heat pump and heater (mode HP+EL);
• only heater (mode EL).
Setting on hours for operation:
23
