26
3.4 Technical Support
Indication
Possible reason
Indicator is off or not blinking
• no external power supply
• circuit not properly connected
• blown fuse
• no network signal
Indicator blinking several times per second
• SIM card is not inserted
• PIN code hasn”t been disabled
• Sim card not active
System does not send any SMS messages
• SIM card account depleted
• incorrect SIM central number
• no network signal
• user number is not programmed in user list
Received SMS message “Incorrect Format”
• incorrect syntax
• extra space symbol left in SMS message
For product warranty repair service, please, contact your local retail store where this product was purchase.
If your problem could not be fixed by the self-guide above, please, contact your distributor or ELDES technical support by email
[email protected]
More up to date information about your device and other products can be found at the manufacturer”s website www.eldes.lt
To activate GPRS connection with unique GPRS parameters only for the upcoming session, send the
following SMS message:
Here in the place of ”Settings” and ”Parameters” enter the corresponding commands from Table 1.
For example, sending SMS message „0001 connect:timeout:25“ you indicate to ESIM120 to start
GRPS connection for 25 minutes (session time). To specify more than one parameter, you have
to separate settings and parameters with ”;” symbol (for example, sending SMS message „0001
connect:type:client;timeout:25“ you indicate to ESIM120 to work in Client mode for 25 minutes).
XXXX_connect:Settings:Parameters
ESIM 120
0001 conn
ect:timeo
ut:25
