manualshive.com logo in svg

elddis affinity, Owner'S Handbook Manual

Share
Download
elddis affinity Owner'S Handbook Manual Download Page 66

8-35

HOW TO USE YOUR CARAVAN’S EQUIPMENT

Paddle Latch

To open the locker, push the paddle
downwards and pull the handle towards you.

MAGNETIC CATCHES

Magnetic catches
work on contact with
the metal plate on
the rear of the door.
Simply close the
door until the
magnet engages
and holds the metal
plate. Pulling the
door towards you
with a moderate
force will be
sufficient to disengage the magnetic catch
and open the door.

SPRUNG HINGES

Overhead lockers will use sprung hinges.
These are suitably strong enough when
closed to securely retain the door and
prevent it from opening in transit. Pulling the
handle towards you with moderate force is
sufficient to open the locker door and hold it
in the open position.

ROOM DIVIDER

The room divider should be held in place
during transit by the use of the strap with the
stud fastening.  When stationary, the room
divider can be held shut by fitting the retainer
catch into the fitted keep.

Summary of Contents for affinity































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands