elddis affinity, Owner'S Handbook Manual

Page: 25 / 126

6-6
GETTING STARTED
Fig 6 Installing and callibrating the system
Fig 2 Wiring connections Watermaster socket
Step 3 - Unscrew and remove the pressure
switch adjusting screw and locking
nut (see Fig 2)
Step 4 - Remove securing screw (see Fig 3)
Step 5 - Take Watermaster IC and place
countersunk screw into screw holes
(see Fig 4)
Fig 3 Preparing Watermaster socket for
connecting Watermaster IC and removing the
securing screw
Step 6 - Plug Watermaster IC onto socket
(see Fig 5) and tighten screw ( NB -
Do Not Overtighten)
To connect the plug and pump kit
Priming:
Step 1 - Place pump into a full water
container (Fig 6).
Fig 4 Place securing screw into Watermaster IC
Fig 5 Insert screw into Watermaster IC
Fig 7 Installing and calibrating the system