background image

5-18

ARRIVING ON SITE

All warranty claims require a product test and
approval by (a dealer of) E&P Hydraulics. All
repairs must be approved by E&P Hydraulics
before the work starts. There can be no
exceptions to this procedure. Immediately
contact E&P Hydraulics directly before trying
to perform a repair or change to your E&P
Hydraulics product. Claims for alleged
damages to products are only allowed if E&P
Hydraulics has had the opportunity to check
the claim.

The warranty becomes invalid when:

If the buyer modifies the system, or if the
buyer makes settings independently. In case
of abuse or negligence, overloading, damage
through accident, incorrect loading or
incorrect weight distribution, damage through
improper use or improper maintenance,
connection to wrong parts or repair attempts
by other persons than the acknowledged
E&P Hydraulics dealer/installer.

This warranty does not apply to physical
damage, damage as a result of force
majeure, in case of commercial use or
adaptation of the product or for products that
are sold as a special offer and/or ‘with
defects’.

This warranty will become invalid if the
product’s identification criteria, which were
attached in the factory, are changed or
removed.

Summary of Contents for 2016 Buccaneer



















































































































































Reviews: