CIM-250/10 - EN
2
BRIEF INSTRUCTIONS
After starting, the motor pump protects itself automatically
ENGINE WATER OR OIL
TEMPERATURE IS DISPLAYED
ENGINE OIL PRESSURE
IS DISPLAYED
THE FUEL LEVEL IS DISPLAYED
PRESS IF YOU WANT
TO SET WORKING
TIME ( UP TO 96
HOURS)
EMERGENCY STOP
MOTOR PUMP OPERATING
SPEED IS DISPLAYED
ACCUMULATED OPERATION
HOURS ARE DISPLAYED
PUMP WATER PRESSURE
IS DISPLAYED
A1 AVAILABLE
PRESS TO ADJUST
WATER PUMP
ELECTRONIC
PRESSURE SWITCH
THE BATTERY IS
NOT CHARGING
LOW ENGINE
OIL PRESSURE
ENGINE PROTECTIONS
ARE ACTIVE
STOPPAGE DUE TO LOW
COOLANT LEVEL
STOPPAGE DUE TO LACK OF BATTERY
CHARGING (BELT BREAKAGE)
STOPPAGE DUE TO HIGH
ENGINE TEMPERATURE
STOPPAGE DUE TO INSUFFICIENT
ENGINE OIL PRESSURE
CUMULATIVE ALARM
~
~
~
~
STOP
BAR
PRESS UNTIL THE 2 SIGNS
START FLASHING TO
EXCLUDE PUMP
PROTECTION.
TO RE-ACTIVATE
PROTECTION, PRESS AGAIN
UNTIL THEY SWITCH OFF.
PUMP PROTECTION
IS ACTIVE
WATER PRESSURE IS
REGULAR
PRESS TO SELECT THE
DISPLAYED FUNCTION,
EACH TIME IT IS PRESSED,
THE INSTRUMENT INDICATED
BY THE DISPLAY CHANGES.
STOPPAGE DUE TO LOW
FUEL LEVEL
START KEY
- OFF
- STOPPAGE IN ALL OPERATING CONDITIONS
- RESTORE PROTECTIONS, CANCEL PUMP PROTECTION EXCLUSION AND TIMER,
DEACTIVATE INSTRUMENTS.
- CONTROL UNIT SUPPLY
- TURNS ALL THE LIGHTS ON FOR 2 SECONDS ( EFFICIENCY CHECK )
- PRESSURE SWITCH ADJUSTING (SEE PAGE 3)
- MOTOR PUMP START UP
0
AUT.
AVV.
STOPPAGE
DUE TO LOW
PRESSURE
OR
PUMP WATER
OVERPRESSURE
OR
ELECTRONIC
PRESSURE GAUGE
(TRANSMITTER)
INTERRUPTED.
IN THIS CASE,
THE ANOMALY IS
HIGHLIGHTED BY
THE FLASHING
WARNING LIGHT.
LOW PRESS.
OVERPRESS.
DISCONN'ED
0
~~
~~
M
P
BAR
%
STOP
~
~
~
~
~
~
~
~
h
BAR
°C
RPM
!
A1
0
AUT.
AVV.
LOW FUEL PRESSURE