ELCOS CAM-335, User Manual

Page: 4 / 20

________________________________________________________________________________________________________
ELCOS – Parma – Italy – CAM-335 Valid for firmware revision 1.14 and above Page 4 of 20
DISPLAY
The instruments displayed on the control unit are divided into groups. The groups are:

Mains

Generator

Engine instruments

CAN Bus instruments (if CAN Bus connection is enabled)

Counters

Maintenance (if maintenance hours have been set)

Rental (if rental hours have been set)

Fuel top-up management (if function is enabled)

Anomalies

Clock

Information about the control unit.
The two arrows are used to scroll through the instrument groups on the display or to select the sub-
menus under the settings.
The following are a few examples of instrument display menus.
The two arrows are used to move within the instrument groups or to scroll through the choices in the
settings menus.
Menu name
Line-to-line
voltages
Frequency
meter
Currents
Active power
Menu name
Fuel level
Temperature
Tachometer
Battery voltage
Pressure
D+ voltage
(input 66)
Icon identifying if
anomaly causes a
stop
or does not
cause a stop .
Menu name
Anomaly
occurred
Menu name
Phase currents
Number of
active
anomalies