________________________________________________________________________________________________________
ELCOS – Parma – Italy – CAM-335
Valid for firmware revision 1.14 and above
Page 14 of 20
USER PROGRAMMING
To access user programming, press the FUNCTION
key and keep it pressed until “PROG” appears on the
display.
Release the button. After a few seconds
appears
Press the
arrows to scroll through the programming menus. Press
to enter the desired sub-menu. For
example:
Press
to scroll through the programming items. For example:
Press
to confirm the selection. The following appears:
Wait for a few seconds:
The chosen parameter is now programmed in the control unit. The settings are stored in a non-volatile memory, and
are therefore maintained even if the power is switched off. The value can be modified at any time by repeating the
procedure as described above.
Press
to return to the previous menu and then proceed to program the other parameters.
Programming a numerical parameter.
When programming a numerical parameter, such as a threshold or a time, press
to increase or decrease
the parameter.
Press
to confirm the value. When the number is saved in the control unit, it changes colour.
