9
DISASSEMBLY
Before proceeding to disassemble any component always disconnect the unit from the
electricity removing the plug or switching off
the 2 pole wall breaker.
Empty the bowl and remove the lid
Remove the mixer from the central shaft
Dismantle the faucet following the sequence shown
Remove the container, lifting it upwards.
Remove the drip-tray and empty it.
CLEANING
Before cleaning disconnect the dispenser from the electricity taking out the plug or
turning off the outside switch on , the wall.
Prepare approx. four litres (2 gallons) of hot water (45-60° C) and specific detergent in
a bowl according to the instructions of the manufacturer; a solution, which is too
concentrated, may cause damage to the parts to be washed, one that is too diluted
Do not wash any component of the machine in a dishwasher.
will not clean adequately. Do not use abrasive detergents.
Use detergents compatible with the plastic parts to avoid damaging the dispenser.
Use a suitable brush and carefully clean all
the parts in contact with the drink
