13
Upon entering the command, below tone signals can be heard:
No tone Exchange does not react to the inquiry
Accept tone for CFX Call Forwarding enabled (80 ms Tone 800 ms Pause)
Disc tone for CFX Call Forwarding not enabled (500 ms Tone 100 ms Pause)
Reject tone Inquiry rejected (8 x {100 ms Tone 100 ms Pause}) if Service
is not available, wrong MSN saved under MSN 1,2 or 3, etc.
tone
tone
tone
tone
tone
tone
tone
tone
tone
tone
tone
tone
Description of the tone signals
Accept tone 700 ms Tone 600 ms Pause 700 ms Tone <only one time>
Reject tone 8 x {100 ms Tone 100 ms Pause} Pause <only one time>
tone
tone
tone
tone
tone
tone
tone
tone
After the Reject tone please start your program sequence again. In such a case
there sequence was faulty or spurious. After the error tone special tones can be
heard which may differ according to the device state and the national ISDN
configuration. If any service cannot be enabled, please ask your network provider.
5.9 CLIP – Calling Line Identification Presentation
While you send an information with your telephone number to the subscriber you
called, the number of a calling subscriber is delivered with a call. This number can be
transmitted to your telephone in form of FSK procedures. To visualize the number of
the caller you need a special CLASS or CLIP telephone device which support this
service.
To deactivate the CLIP function:
#
#
To activate the CLIP function:
#
#
The transmission was only ON HOOK tested. (with handset Hang Off)
Note
For the special telephone set ask your service provider.
Some network providers transmit identity although restriction is activated.
Default setting: CLIP enabled
