8
If you have still a waiting partner and your active partner hooks on, you will hear a
disconnect tone
. If you now hook on your receiver
and the second partner is
still waiting, the NT1+2a/b will
Remind you of the call in hold state:
Your telephone is now ringing continuously for about 10 seconds. If you hook off
within this time, you will be connected with the call on hold. Otherwise this call
will be cleared.
If you have an active call and a call on hold and you hook on
your receiver first,
then the active call will be cleared and the NT1+2a/b will remind you of the waiting
call in the same way as described above.
There is still another way to retrieve a waiting call after your active partner has
hooked on and you hear the disconnect tone. If you haven‘t hooked on yet,
you can
Switch to the waiting call
:
(with no call active)
®
If the waiting call was already cleared, you will hear the disconnect tone for a short
time overlaid with
and you should hook on
at this point.
5.5.2 Extended functions
There are still some functions for clearing calls if you have an active and a call on
hold. But note the following.
Disconnect the hold call:
®
The partner still on hold will now hear the disconnect tone. You can continue your
present call.
Terminate the active call and switch to the one on hold:
®
You are now connected to the call on hold. Your first partner will now hear the
disconnect tone.
