1
The three channel
SPC
Pulse
is the world's first pulse logger designed specifically for
energy and carbon management. Its unique 'auto-sensing' inputs make for foolproof
hook-up even onto polarised meter outputs, and its dedicated software package
'PowerPackPro' is perfectly tailored for the job. Its connection cables convert easily
to mate with ‘meter specific’ sockets, and Elcomponent keep all the commonly
encountered cable types in stock. The unit is small, light and compact, but also tough
enough to withstand years of professional use.
The
SPC
Pulse
is suitable for logging any kind of meter, measuring any utility
(gas/water/electricity etc). However, connecting to meter pulse outputs is not
always straightforward, because many types use an 'electronic' as opposed to
‘electromechanical’ output style. The electronic output is usually polarised so the
operator has to ensure the logger is connected the 'right way round' or no pulses will
be detected. This can be difficult to assess with a non-intelligent logger, but with the
SPC
Pulse
it's easy. The unit automatically detects the meter output polarity and
automatically adjusts its own polarity to suit. Its detection circuits are highly
sensitive so it can be used on all kinds of pulse output even where short duration or
high contact resistance would normally cause problems.
The unit features a rechargeable Li-Ion battery for maximum survey length and
minimum recharge times, whilst remaining light and compact. Surveys of up to six
weeks are no problem with the
SPC
Pulse
. The unit looks the part too… housed in a
weather resistant piano black 'Peli' case it comes in a neat zip-up pouch complete
with a set of high quality connection cables.
INTRODUCTION
