8
SPC
PULSE
INITIALISATION PROCEDURE
I)
Connect the
SPC Pulse
to a spare USB port on your PC using the supplied
A to B type USB cable. This will normally wake the unit up. If it does not,
firmly press the On/Off/Detect button to do so. Windows should
recognise the logger and install the necessary drivers etc. This is
confirmed by a dialogue ‘balloon’ at the bottom right of the screen.
NOTE
: If the PC fails to recognise the
SPC
Pulse
, or displays a different message,
refer to Appendix 1 ‘Loading the SPC drivers’ to rectify the situation.
I)
With PowerPackPro running connect the
SPC
Pulse
to a spare USB port on
your PC and after a few seconds the software will link to the logger and
display the dialogue box:
II)
Press ‘OK’ to add the logger to the tree on the upper left of the desktop.
CON PROGRAMMING THE SPC
PULSE
