36
en
CAL
(CALIBRATION)
UNITS
Toggle between Metric (millimetres) or English (inches)
units.
VELOCITY
This function calibrates your gauge to a specific material
type by entering a material velocity.
ONE POINT
Performs a single point calibration. This function allows you
to automatically calculate the velocity by entering a known
sample thickness.
TWO POINT
Performs a two-point calibration. This function allows you to
automatically calculate the velocity by entering a second
known sample thickness.
MATERIAL
Select the material velocity from a chart of basic material
types when a known sample thickness, or material velocity
cannot be obtained.
DISP
(DISPLAY)
VIEW
Choose between DIGITS (large digits) and B-SCAN (cross
section) views.
BACKLIGHT
Choose between OFF, ON, AUTO, or INVERT backlight.
CONTRAST
Adjust the display contrast for variable light conditions.
BSCAN START
(B-SCAN view mode only) Set the start position of the
B-SCAN view.
BSCAN DEPTH
(B-SCAN view mode only) Set the overall depth of the
viewable measurement area. It functions a lot like a zoom
on a camera.
SETUP
OPEN
Displays a list of factory and user-defined setups currently
stored in memory. These setups can be recalled and used
at any time.
SAVE
Save a custom setup that you have modified or created.
DEFAULT
SETUP
Loads a basic default setup. Use only as a last resort if the
setups in your gauge have been corrupted and a computer
is not accessible.
LANGUAGE
Select the menu language
DATA
NEW
Creates a new alpha numeric grid file with auto identifiers.
You can customise the file according to your requirements.
EDIT
Modify the parameters of grid files previously saved.
Note: Predefined coordinates cannot be changed once they
have been created.
OPEN
Recalls existing grid files from gauge memory.
DELETE ONE
FILE
Deletes a single file from the gauge memory.
DELETE ALL
FILES
Deletes all files from the gauge memory.
Menu
Function
Description
