Limits (T)
During the inspection process surfaces can often have specified
maximum levels of soluble salts.
Users can program an upper warning limit into the Elcometer 130
gauge by selecting
Menu/Set Limits/Set Upper
.
To switch the limit on, the user should ensure that the
Enable Limits
radio button is checked.
When an Upper Limit has been set up and enabled the “ ” icon is
displayed.
When the Elcometer 130 gauge takes a reading which is outside
the set limit the following occurs:
The Red LED flashes
The reading is displayed in red
The alarm beeps 3 times
The limit icon turns red
In addition, the number of readings above
limit statistic is incremented when readings
are stored into memory and the reading is
tagged with the limit icon. For more
information see Batching on page 21.
To switch off the upper limit go to
Menu/Set Limits
and un-check the
Enable Limits
radio button
.
The programmed limit value can be displayed on the reading screen
via
Display/Statistics/Select Statistics
and checking the
appropriate radio button.
Individual upper limits can also be set for each batch. For more
information see Batching on page 21.
www.elcometer.com
20
R
en
