Program manual
Euro-1000M
© Elcom Ltd.
34
3.7 Function texts programming
Up to 17 characters for function texts can be used. Use the hexadecimal and alphabetical character table.
Use the same procedure used for programming of the receipt logo.
3.7.1 Function texts programming
Switch the cash register to
P
mode:
4
J
. Press the button
K
(VOID)
. The information
T 0 1
202020
will appear on the display. Digit
1
detrmines the text number which is actually programmed.
The character
T
means that you are programming function texts. Enter new text by hexadecimal codes
and press the key
Y
(SUBTOTAL)
. The Cash register is now ready to program the next function text. If
you make a mistake during the programming, correct the previous characters by pressing
Q
(CLEAR)
.
Finish the function text programming by pressing the
[
(TOTAL)
.
Function texts programming procedure:
Character codes
The next function text programming
Skip text
From function text number 1
Function text number
..
Display:
The first function text programming.
N
01
416D
T 0
1
Note:
The Euro-1000M cash register permits preprogramming names of basic operations listed in the
receipt. The following table provides the default settings that can be programmed as needed.
Text No. Description
Text
1
Cash payment denomination
C
ASH
2
Check payment denomination
C
HECK
3
Credit card payment denomination
C
REDIT
4
Change value denomination
C
HANGE
5
Refund value denomination
REFUND
6
Void denomination
VOID
7
Received on account denomination
RA
8
Paid out denomination
PO
9 Total value
T
OTAL
10
Document number
D
OCUMENT NUMBER
