background image

 

 

Technical safety instructions 

This manual contains warnings that must be observed for personal safety and prevention of material 
damage. Personal safety notes are marked with a triangle of danger, while warnings for property 
damage  are  not  marked  with  a  triangle  of  danger.  The  danger  warnings  are  shown  as  follows  and 
indicate the different levels of danger in descending order. 

 

HAZARD 

This  means  that  failure  to  observe  the  relevant  safety  measures  will 
result in death or serious personal injury. 

 

AVVERTENZA 

Means that non-observance of the relevant safety measures can result in 
death or serious personal injury. 

If there are more than one level of risk, the hazard warning always indicates the highest level. 
If you draw attention in a warning to the risk of personal injury by using the triangle, the risk 
of possible material damage may also be indicated at the same time. 

Qualified staff 

The device or system in question may only be installed and put into service in the context of this 
manual.  The  startup  and  operation  of  an  instrument/system  may  only  be  carried  out  by  qualified 
personnel. With reference to the safety notes in this document, «qualified personnel" means persons 
authorized to start up, ground and identify electrical equipment, systems and circuits in accordance 
with safety technology standards. 

Disclaimer of liability 

Elbro AG/Elbro Italia s. r. l. reserve the right to change product specifications and/or to dis-
continue production of products without prior notice and without obligation to provide new func-
tions or instructions in products already sold. The manufacturer cannot be held liable for any 
direct or indirect loss or damage that may result from the use of the product. The product is 
not suitable for use or application on parts of life support systems/equipment, or in applica-
tions where malfunctioning of the product itself can cause damage to property and/or people or 
create a danger to the life or physical safety of people, animals and living beings. In addi-
tion, the product cannot be installed in applications where failure or malfunctioning may cause 
flooding and/or fire, nor can it be installed in military applications. The device must be used 
within the limits of the weather conditions as described in the operating and maintenance man-
ual. It is the customer's responsibility to verify that the product is in fact compatible from a 
regulatory point of view with the final installation. The User must note that the management by 
remote control is a free choice, for which he is solely responsible. The use of the product is 
not permitted for other purposes, such as, for example, the implementation of external equipment 
and/or the commissioning of devices with fraudulent functions or for illicit purposes. We do not 
accept any responsibility for failure of the equipment itself for possible faults, signal voids, 
interruption of the GSM/GPRS network or for external causes such as incorrect installation or 
poor maintenance. Elbro shall under no circumstances be liable for the costs charged by the mo-
bile telephone operator in the event of repetition or repeated transmission of text messages or 
GPRS data connection by the device. Elbro AG takes the utmost care and attention in the drafting 
of the following manual; however, errors or omissions may be contained, Elbro AG reserves the 
right to modify and/or change parts of the following package due to errors or changes in product 
characteristics without prior notice. 

Email service 

Elbro  does  not  guarantee  the  successful  sending  of  e-mails,  nor  does  it  guarantee  the  constant 
functioning  of  the  service  for  which  it  declines  any  responsibility  from  now  on,  the  user  is 
informed of the possibility that Elbro may terminate or unilaterally suspend this service free of 
charge at any time and without prior notice. 
The  use  of  GPRS/UMTS  data  can  lead  to  high  telephone  costs.  Therefore,  we  recommend  that  you 
consult your telephone service provider in order to check the most suitable telephone plan. In no 
event shall Elbro AG or its suppliers be held liable for any loss of revenue or profits or for 
indirect, consequential or incidental reasons, whether for reasons (including negligence) arising 
out of or in connection with the use or inability to use the product, even if El-bro AG has been 
advised  of  the  possibility  of  such  damages.  Elbro  AG,  its  subsidiaries  or  affiliates  or  group 
companies or distributors and resellers Elbro AG does not guarantee that the functions will fulfill 
your expectations faithfully and that the SMSB121TH, its firmware and software is error-free or 
that it will operate continuously. 
 

Summary of Contents for smartButler SMSB121TH


















Reviews: