Detector 3000
Seite 5 / 11
Stand: 29.8.19 GB
Make sure that the cables tested for current are double insulated.
The tester must no longer be used if one or more functions fail or if no functionality is
indicated.
It is not permitted to use the tester during rain or precipitation.
A perfect display is guaranteed only within a temperature range of -15°C to +55°C at
relative air humidity less than 85%.
If the safety of the user cannot be guaranteed, the tester must be switched off and secured
against unintentional use.
Safety is no longer guaranteed e.g. in the following cases:
−
obvious damage
−
broken housing, cracks in housing
−
if the tester can no longer perform the required measurements/ tests
−
stored for too long in unfavorable conditions
−
damaged during transport
−
leaking batteries
The tester complies with all EMC regulations. Nevertheless it can happen in rare cases that
electric devices are disturbed by the electrical field of the tester or the tester is disturbed by
electrical devices.
Never use the tester in explosive environment
Tester must be operated by trained users only
Operational safety is no longer guaranteed if the tester is modified or altered.
The tester may be opened by an authorized service technician only.
4. Intended Use
The tester may be used only under the conditions and for the purposes for which it
was designed. Therefore, observe in particular the safety instructions, the technical data including
environmental conditions.
5. Testers Information
1. Opening for current measurmenet
2. Test leads (on back side)
3. LED display
4. LCD display
5. On/ off and function button
6. Torchlight and hold button
7. Battery compartment
8. Sensor for cable break detection, NCV
1
2
3
4
5
6
7
8
