Detector 3000
Seite 3 / 11
Stand: 29.8.19 GB
Failure to read the tester manual or to comply with the warnings and references contained
herein can result in serious bodily injury or tester damage.
The respective accident prevention regulations established by the professional associations are to
be strictly enforced at all times
Voltage tester is not a measurement device, it is only allowed to use for testing purposes.
1. Introduction / Product Package
The Detector 3000 is a universally applicable testers for voltage, current, continuity and rotary field
testing and various additional features.
The testers are constructed according to the latest safety regulations and guarantee safe and
reliable working.
It complies with the standard for two pole voltage testers EN61243-3:2014.
The Detector 3000 is characterized by the following features:
●
Designed to meet international safety standards. EN61243-3:2014
●
Measurement Category (CAT.) IV 600V
● Measurement Category (CAT.)
III 1000V
●
AC and DC voltage test up to 1000V with LEDs
•
Current test up to 200A
●
AC voltage test up to 1000V and DC voltage test up to 1500V with LCD
●
Cable break tests by Non Contact Voltage detection
●
Polarity indication
●
Single-pole phase test
●
Phase rotation test
●
Continuity test
●
Resistance measurement
●
Frequency measurement
●
Vibration motor
●
Auto-power ON / OFF
●
Torch light
●
IP64 protection
After unpacking, check that the instrument is undamaged.
The product package comprises:
1 pc Detector 3000
2 pcs 4mm test tip adapters
2 pcs GS38 rubber caps
2 pcs batteries 1.5V, IEC LR03
1 pc operating instructions
