16
Cooking hobs 4 GAS and 3 GAS + 1 electric hotplate
TECHNICAL INFORMA-
TION FOR THE INSTALLER
In order to install the cooker top into
the kitchen fixture, a hole with the
dimensions shown in fig. 4.1 has to be
made, bearing in mind the following:
✓
within the fixture, between the
bottom side of the cooker top and
the upper surface of any other
appliance or internal shelf there
must be a clearance of at least 30
mm;
✓
the cooker top must be kept no less
than 100 mm away from any side
wall (fig. 4.1).
✓
the hob must be installed at least 35
mm from the wall.
✓
there must be a distance of at least
650 mm between the hob and any
wall cupboard or extractor hood
positioned immediately above (see
fig. 4.2)
✓
if the hob is not installed over a
built-in oven it is essential to install
a heat baffle between the bottom of
the hob and the underlying unit.
470
35 min
500
550
100
580
min
650 mm
Fig. 4.1
Fig. 4.2
✓
if the hob is installed over a built-in
oven, there must be a distance of at
least 30 mm between the two appli-
ances. The two appliances should be
connected to the gas supply with
independent connections, in compli-
ance with the current laws in force.