TIPS FOR USING FOOD PROCESSOR
1. To achieve the best result when pureeing solid ingredients, place small portions into glass jar
one by one instead of placing a large quantity all at once.
2. If you are processing solid ingredients, cut them into small pieces (2-3cm) first before putting
them into the jar.
3. When mixing solid ingredients start off with a small amount of liquid. Gradually add more liquid
through the measuring cup.
4. Always place your hand on top of the blender when operating the appliance.
CLEANING AND MAINTENANCE
1. Unplug the appliance. Cleaning should only be carried out when the appliance is switched off
and the plug is removed from the wall outlet.
NOTE
: After the blending process, wash the removable parts immediately. Do not let the food
or any other liquids dry on the jar assemble as this will make the cleaning difficult and residue
accumulated may harden or degrade the sealing rings as time passes.
2. For blender jar, pour a little warm water into the jar, turn and hold the speed selector to P
position for a few seconds.
3. Remove the jar and rinse and rinse under running water. Remove Jar cover and measuring
cup, then immerse the top cover, measuring cup in water and clean them with a soft brush,
finally clean them with dump cloth
4. After the chopping process, empty the food jar and dismantle all detachable parts and rinse
them in warm soapy water. Extreme caution must be taken when handling blade as it is very
sharp. All the accessories except motor base are dishwasher safe components, but the
temperature setting shall not exceed 70
℃
. Then dry thoroughly.
5. After kneading/ mixing process. empty the food jar and remove the lid, the plastic blade, pusher,
then immerse them in water and clean them with a damp cloth or soft brush.
6. After beating / whisking process, empty the jar and remove the lid, the whisk, pusher, then
immerse them in water and clean them with a damp cloth or soft brush
7. After slicing or shredding process, empty the chopping jar and remove the disk stand from the
bowl, then remove the disks from disk stand, the pusher, the lid
then immerses the in water and
clean them with a soft brush. Extreme caution must be taken when handling blade as they are
very sharp.
8. Wipe the motor base with a damp cloth. Never immerse it in water as electric shock is possible
to occur. Then dry thoroughly. Ensure the interlock area is free of food particles.
9. Certain ingredients such as carrots may cause discolorations on the surface of the parts. This
does not have a negative effect on the parts. The discolorations usually disappear after some
time or rub with cloth dipped with vegetable oil to remove discoloration
10. Remove the stubborn spots by rubbing with non-abrasive cleaner. If liquids spill on the motor
base, first power off the appliance and remove the plug, wipe with a damp cloth and dry
thoroughly.
9
Summary of Contents for EFP-K2480
Page 12: ......
