OPERATING THE APPLIANCE
A. Blending
1. Place the blending jar on the motor base from the unlock position and slightly turn the jar
clockwise until the blending jar locks into the lock position on the motor base. If the blending jar
is not fit into position, the blender will not be working.
2. Make sure the position of the switch is in
stop state (the switch shall be in “0” position)
3. Fit the jar cover on the blending jar and ensure it is secure fitted into position then fit the
measuring cup. You may add ingredient into the blending jar through measuring cup during
the operation.
4. Connect the plug to wall outlet and set the speed selector to your desired speed. Turn the
speed selector to
“0” Position once the mixture has been blended to your desired consistency.
5. Remove the blending jar from the motor base (turning the jar anti-clockwise), carefully take
down the jar cover, then pour and serve.
Note:
Peel of the skin for fruit and vegetable and cut into small piece and put into blender jar.
Add a bit of water to smooth running for the operating. Do not excess the maximum level as
indicated in the blending jar.
Note:
Never use hot water or running the appliance in empty. This blender cannot used for
meat blending.
4
Summary of Contents for EFP-K2480
Page 12: ......
