background image

13

Caution!

The  griddle  becomes  very  hot 

during  use  and  remains  very  hot 

even after it is switched off.

Keep children well out of reach.

ADVICE FOR THE SAFE USE 

OF CERAMIC GRIDDLE

–  Do  not  lean  on  the  cooking  zones 

when they are switched on.

–  Do  not  put  aluminium  foil  or  plastic 

objects  on  the  cooking  zones  when 

they are hot.

–  Do  not  leave  objects  of  any  type  on 

the  surfaces  made  of  ceramic,  glass 

or similar fragile material.

–  Remember  that  the  cooking  zones 

remain hot for some time after they are 

switched off (about 30 min.).

–  Follow  the  cleaning  instructions  care-

fully.

–  If  you  note  a  crack  in  the  cooktop, 

switch  the  appliance  off  immediately 

and call the After-Sales Service.

Do not scratch the cooktop with 

cutting or sharp objects.

Do  not  use  the  cooktop  as  a 

work surface.

CLEANING THE CERAMIC 

GRIDDLE

Make sure that the cooktop is switched 

off  before  cleaning  it.

– Remove any encrustation.
– Remove dust with a damp cloth.
– Detergents can be used, but they must 

not be abrasive or corrosive.

– Any remaining detergent must be com-

pletely removed with a damp cloth.

–  Do  not  put  any  objects  on  the  cook-

top which can melt with heat, such as 

plastic  objects,  aluminium  foil,  sugar 

or sugar products.

–  If  any  object  melts  on  the  cooktop, 

remove it immediately (while the cook-

top is still hot) using a speaal scraper, 

to  prevent  any  irreversible  damage  to 

the glass ceramic surface.

–  Do  not  use  knives  or  sharp  objects 

which could damage the cooktop sur-

face.

– Do not use abrasive sponges or pads 

which  could  irreversibly  damage  the 

glass ceramic surface.

Summary of Contents for E30-610 X









































Reviews: