manualshive.com logo in svg

Elba E 8550FG2 Series, Instructions For The Use - Installation Advices, Page: 3 / 36

Share
Download
Elba E 8550FG2 Series Instructions For The Use - Installation Advices Download Page 3

3

Read the instructions carefully before installing and using the appliance.

CAUTION: This apparatus must only be installed in a permanently ventilated room in 

compliance with the applicable regulations.

Dear Customer,

 

Thank you for having purchased and given your preference to 

our product.

The safety precautions and recommendations reported below 

are for your own safety and that of others. They will also provide 

a means by which to make full use of the features offered by your 

appliance.

Please preserve this booklet carefully. It may be useful in futu-

re, either to yourself or to others in the event that doubts should 

arise relating to its operation.

This appliance must be used only for the task it has explicit-

ly been designed for, that is for cooking foodstuffs. Any other 

form of usage is to be considered as inappropriate and there-

fore dangerous.

The manufacturer declines all responsibility in the event of 

damage caused by improper, incorrect or illogical use of the 

appliance.

Important:

This appliance is designed and manufactured solely for the cooking of domestic (house-

hold) food and is not suitable for any non domestic application and therefore should not 

be used in a commercial environment.

This appliance guarantee will be void if the appliance is used within a non domestic 

environment i.e. a semi commercial, commercial or communal environment.

Summary of Contents for E 8550FG2 Series





































Reviews:

No comments