10
Big One Xtreme II_1.0_ENG.docx
Elaut NV
SAFETY
•
The machine may only be installed by qualified persons.
•
Machine installation must satisfy the current applicable standards.
•
Switch off the power supply before commencing installation or
maintenance work.
•
Do not open or disassemble the machine. Opening the machine can
prove hazardous and will void the warranty.
•
If connected, the machine or its components are powered by a
100-245V power supply.
•
Make sure that the power cable is connected properly.
•
Do not plug or unplug a cable, while the machine is switched on.
•
Do not plug this system into a supply voltage other than indicated
on the machine label.
•
The operator is responsible for the proper installation and machine
use. An incorrect installation may result in product damage. The
warranty will become void if the machine and/or electronic
components are damaged due to an incorrect installation.
THERMAL AND ELECTRICAL SAFETY
•
In order to minimize the risk of ignition, component temperatures
are limited to safe levels. The hottest components are resettable
fuses that use thermal PTC features. Their off-state temperature is
max. 125°C.
•
The earth leakage current is less than 1mA.
INSTALLATION
•
Switch off the power supply before commencing installation.
•
The operator is responsible for a correct and safe installation.
