Elation VOLT Q5E, User Manual

Page: 12 / 26

12
I N STA L L AT I O N G U I D E L I N E S
OMEGA BRACKETS INSTALLATION
Use the included Omega Bracket to mount the fixture(s) on truss or other suitable structure.
Insert the Omega Bracket into the matching holes on the bottom of each fixture. Secure the
Omega Brackets to the fixture by turning each quick-lock fastener ¼ turn clockwise; making
sure the fastener is completely locked. Omega Brackets can be installed into the fixture base
as illustrated below.
CLAMP INSTALLATION
When mounting fixture to truss, be sure to secure an appropriately rated professional grade
rigging clamp to the included Omega Brackets using an M10 screw fitted through the center
hole of the Omega Brackets . The fixture provides a built-in rigging points for a SAFETY CABLE .
Be sure to only use one of the designated rigging points for the safety cable and never secure
a safety cable to a carrying handle.
RIGGING
Overhead rigging requires extensive experience, including amongst others calculating working
load limits, installation material being used, and periodic safety inspection of all installation
material and the fixture. If you lack these qualifications, do not attempt the installation
yourself. Improper installation can result in bodily injury.
*SAFETY CABLE*
ALWAYS ATTACH AN APPROPRIATELY RATED
SAFETY CABLE (NOT INCLUDED) THAT MEETS
ALL LOCAL, NATIONAL, AND COUNTRY CODES
AND REGULATIONS WHENEVER INSTALLING
FIXTURE IN A SUSPENDED ENVIRONMENT!
Clamp
Omega Bracket
Safety Cable