w w w . e l a t i o n l i g h t i n g . c o m
SIXPAR 300IP
/ SIXPAR 300WMG
User Manual ver
F I X T U R E I N S T A L L A T I O N
F L A M M A B L E M A T E R I A L W A R N I N G
Keep fixture at least 5.0 ft (1.5m) away from any
flammable materials, decorations, pyrotechnics, etc.
E L E C T R I C A L C O N N E C T I O N S
A q u a l i f i e d e l e c t r i c i a n s h o u l d b e u s e d f o r a l l
e l e c t r i c a l c o n n e c t i o n s a n d / o r in s ta lla tio n s .
C A U T I O N S
•
For added protection, mount the fixture in areas outside walking paths, seating
areas, or in areas were unauthorized personnel might reach the fixture.
•
Min/Max ambient operating temperature for this fixture is
5°F to 113°F (-15°C to 45°C)
.
•
Do not use the fixture under or above this temperature.
•
Before mounting the fixture to any surface, make sure the installation area can
hold a minimum point load of 10 times the weight of the fixture.
(210 lbs / 95 kg)
•
Fixture installation must always be secured with a secondary safety attachment,
such as an appropriate safety cable.
•
Never stand directly below the device when mounting, removing or servicing.
Ensure ALL connections and end caps are properly sealed with a dielectric
grease (available at most electrical suppliers) to prevent water corrosion and/or
electrical short circuit.
POWER LINKING
Max number of units that can be power linked is
5 units @110V
and
10 units @240V
.
CLAMP MOUNTING
The
SIXPAR 300IP
/ SIXPAR 300WMG
provides a unique integrated Dual Yoke /
Floor Stand. When mounting this fixture to truss be sure to secure an
appropriately rated clamp using an M10 screw fitted through the center hole of the
Dual Yoke / Floor Stand.
