PLATINUM SPOT LED II ™
©Elation Professional, Los Angeles Ca.
35
www.ElationLighting.com
-
“TILT” – tilt movement.
- “TILT-Fine” – precision tilt movement
-
“Move Speed” – adjust pan and tilt motor speed
-
“Gobo Wheel 1” – select gobos from gobo wheel 1
-
“Gobo Rot. 1” – adjust gobo 1 indexing or rotation
-
“Gobo Wheel 2” – select a gobo from gobo wheel 2
-
“Prism” – select a prism, prism macro, or frost
-
“Prism Rot.” – adjust the prism indexing or rotation
-
“Color Speed” – adjust the CMY mixing speed
-
“Color Macro” – select a built-in color mixing macro
-
“Color Wheel” – select a color from the color wheel
-
“Iris” – adjust the iris value
-
“Focus” – adjust the focus value
- “Strobe”
–
adjust
the
strobe
-
“Dimmer” – adjust the dimmer intensity
-
“Scene Time” – set the hold time for the scene
-
“Input By Out” – this function will store a scene from an external DMX
console. See the next section for scene editing via an external DMX
controller.
Step 1B – Building Scenes from an External DMX Controller
The fixture includes a simple built-in DMX recorder. This recorded allow you to build a
scene using your own DMX console and then send that scene to the fixture to be stored
inside one of the fixture scene storage banks. Many people may find this procedure easier
and quicker than using the on board menu functions as in “Step 1.” To store a scene from
an external DMX controller follow the procedures below:
-
Using your DMX control build and store scenes as you normally would.
-
Once you have built all your required scenes, enter the fixtures main menu
and
toggle
to
Step 2 – Editing Programs.
The control will store a maximum of 10 programs. A program can store one or a maximum
of 64 scenes. Keep in mind that a scene can only be access when it is stored inside one of
