Elation PLATINUM SPOT LED II User Manual Download

Page: 11 / 52

PLATINUM SPOT LED II ™

©Elation Professional, Los Angeles Ca.

www.ElationLighting.com

1. Main Output Lens – Main output lens.

2. LED Menu Display – Full color animated menu display.

3. DC

Switch

- Controls menu and display power when the unit is disconnected from main

power.

4. Microphone

–

This microphone receives external low frequencies to trigger the unit in

Sound-Active mode. This microphone is designed to receive low frequency sounds only,

tapping on the microphone and high pitch sounds may not trigger the unit.

5. Left Button – This button is used to toggle through the menu display.

6. Down

Button

– The down button is used to toggle down or back through the menu

functions

and

settings.

7. Right

Button

- This button is used to toggle through the menu display.

8. Mode/Esc Button - This button is used to access the menu functions.

9. Up Button – The up button is used to toggle forward through the menu functions and

settings.

10.Enter Button – The enter button is used to enter in to a certain menu function or to lock

a function into memory.

11.Carrying Handle – Please use this intergraded handled to move the fixture form

location to location. Never carry the fixture by the head.

12.3-PIN DMX Input Jack – This jack accepts an incoming DMX signal via a male, 5-pin

XLR

jack.

Summary of Contents for PLATINUM SPOT LED II





















































Search results

Summary of Contents for PLATINUM SPOT LED II

Reviews:

Related manuals for PLATINUM SPOT LED II

Brands by name

Popular brands

Elation PLATINUM SPOT LED II, User Manual

Search results

Summary of Contents for PLATINUM SPOT LED II

Reviews:

Related manuals for PLATINUM SPOT LED II

Brands by name

Popular brands