PLATINUM SPOT LED II ™
©Elation Professional, Los Angeles Ca.
26
www.ElationLighting.com
Feedback – This function turns the feedback correction on or off. This function is
set to “ON” as default. This function allows for automatic pan and tilt correction in
the event either one disrupted during normal operation.
Movement Speed – This function changes the speed function of the Pan and Tilt
motors. Use this function intergrading Platinum Spot LED into lighting rigs that
includes original Design Spot 250s. There are 3 different mode variations;
Speed 1 (Default): Slower than the original Design Spot 250 for smoother, more
precise movements.
Speed
2: Pan and Tilt speeds are identical to the first generation Design Spot
250.
Speed 3: includes a faster Pan speed. Pan speed is 0.5 seconds faster than
original DS-250. Tilt speed will be the same as speed 2.
Mic Sensitivity – This function makes the internal microphone more or less
sensitive to sound. This function only works in conjunction with the sound active
modes. The default setting is 70% and setting range from 0% to 99%.
Hibernation– When activated, this function will automatically put the fixture in
power stand-by mode after a defined period of time of no DMX activity. This
prevents the fixture form expending power for extended periods in the event the
fixture has been left on accidently. In stand-by mode the lamp and all motors will
power down if no DMX signal is sent to the fixture for a period of 15 minutes (default,
can be user defined). The fixture will automatically reset and return to normal
operation once a DMX signal is sensed.
8.3.2 Service Setting–
Password - The Password for this function is “50”.
RDM PID- With this function you can call up various submenus via RDM.
8.3.3 Fans Control -This function is used to change the functionality of the internal
cooling fans. The available selections are: 1) “AUTO” – The fans will automatically
switch between low and high speeds depending on the internal operating temperature.
