PLATINUM SPOT LED II ™
©Elation Professional, Los Angeles Ca.
28
www.ElationLighting.com
8.4 Reset Functions: The reset function returns a motor to the “Home” position. There are
several reset functions available on this fixture. The list below details the functionality of
each available selection.
¾
Reset All: This function will reset all internal motors to the home position.
¾
Reset Pan and Tilt: This function will only reset the pan and tilt motors to the home
position.
¾
Reset Colors: This function will only reset the color wheel to the home position.
¾
Reset Gobos: This function will only reset the gobo wheels to the home position.
¾
Reset Others: This function will reset all other motors not associated with any in the
previously listed reset commands to the home position.
8.5 Effect Adjust:
8.5.1 Test
Channel
–This menu function allows the user to select each individual
fixture channel and test it’s function independently from the control board.
8.5.2 Manual Control –This function is designed for testing and manual control. When
activated this function will center the pan and tilt motors, open the shutter, and bring
the dimmer to 100%. The pan and tilt function will still operate if the fixture needs to
be positioned to a flat clear surface.
8.5.2 Calibrate values –This function should only be performed by a qualified technician.
This function allows a user to make small adjustments to the effect wheels (color,
gobo, shutter, etc) to compensate for ware or in the event a sensor has been
knocked slightly out of place. Because improper use of this function can result in
undesired operation this function has been password protected. The password is
050 and must be entered each time the calibration menu function is entered.
Because calibration is an extremely delicate procedure instruction on performing this
action are left out of this manual. For a first time calibrator, please contact our
customer support team for step-by-step instructions.
