Elation E Spot Led II, User Manual

Page: 10 / 51

w w w . e l a t i o n l i g h t i n g . c o m
10
E SPOT LED II
™
User Manual 1.0
I N S T A L L A T I O N
T he elec tric connection m ust only be carried out by a qualified elec trician.
C A U T I O N S
•
For added protection, mount the fixture in areas outside walking paths, seating areas, or
in areas were unauthorized personnel might reach the fixture.
•
Before mounting the fixture to any surface, make sure the installation area can hold a
minimum point load of 10 times the weight of the fixture. (250 lbs / 113 kgs)
•
Fixture installation must always be secured with a secondary safety attachment, such as
an appropriate safety cable.
•
Never stand directly below the device when mounting, removing or servicing the fixture.
•
Be sure the fixture is kept at least 0.5m (1.5 feet) away from any flammable materials
(decoration etc.).
MOUNTING POINTS
•
Overhead mounting requires extensive experience, including amongst others calculating
working load limits, installation material being used, and periodic safety inspection of all
installation material and the device. If you lack these qualifications, do not attempt the
installation yourself. Improper installation can result in bodily injury.
•
Fixture is fully operational in any mounting position, hanging upside-down, side mounted,
or on any flat level surface, and will remain steady no matter the angle of the fixture.