w w w . e l a t i o n l i g h t i n g . c o m
28
E SPOT LED II
™
User Manual 1.0
SPOT
This function allows you to optimize the lamp without the use of an external DMX
controller. In this mode, the device will not react to any control signal.
1. Access the main menu.
2. Press
UP
until
“SPEC”
is displayed, press
ENTER
.
3. Press
UP
until
“DFSE”
is displayed, press
ENTER
.
4. The display will show
“ON/OFF”
.
5. Press
UP
to display
“ON”
to activate or
“OFF”
to deactivate this function.
6. Press
ENTER
to confirm.
7. Press
MODE/ESC
to return to the main menu.
DFSE
With this function you can restore the factory default settings of the fixture. All
settings will be set back to the default values. Any edited scenes will be lost. When
restoring the factory settings the unit must be set to the address that the unit was in
when you started editing.
When you confirm this function, the fixture will begin to
reload the original factory settings.
1. Access the main menu.
2. Press
UP
until
“SPEC”
is displayed, press
ENTER
.
3. Press
UP
until
“DFSE”
is displayed, press
ENTER
.
4. The display will show
“ON/OFF”
.
5. Press
UP
to display
“ON”
to activate or
“OFF”
to deactivate this function.
6. Press
ENTER
to confirm.
7. Press
MODE/ESC
to return to the main menu.
Summary of Contents for E Spot Led II
