20
Default settings
Press
[Enter]
to reset all fixture personalities (not the adjusting functions) to the default values. On the display
will appear
rSt
meaning that the fixture makes the reset. See the table of personality setting and their default
positions.
Adjusting the default positions. of colour, gobo and effect wheels
By this function you can calibrate and adjust the colour, gobo and effect wheels to their standard/right positions.
Use the
[Up]
and
[Down]
keys to browse through the adjusting menu - the display shows step by step these
messages:
"PAn, Tilt, SPEd, Colo, EFEC, Prot, rGOB, Grot, Foc, Stro, dimr, FCAL"
by which you can adjust
the fixture to the required/desired position (0-255) before the function calibration. Then when the positioning is
finished use the last
"FCAL"
function (Fixture calibration).
1. Calibration via the control board
Press
[Enter]
and the
[Up]
and
[Down]
keys in order to display the following messages:
"Colo, EFEC, rGob,
Grot"
for very smooth function calibration. Select one of them, press
[Enter]
and use the
[Up]
and
[Down]
keys
in order to adjust their right value from 0 to 255. Then press
[Enter]
to confirm or
[Mode]
to cancel and return to
the menu. This can be repeated for each calibration parameter if it is required. When the calibration is finished, it
Personality
Display
Pan reverse
Tilt reverse
Lamp on
automatically
Display intensity
Lamp Off via DMX
Low fan speed
operating
Default values
(SHADED)
Movement
resolution
Automatic blackout
of display
Summary of Contents for Design Spot 250
Page 1: ...1 Version 1 0 COLOR SPOT 250...
Page 2: ...2...
