DESIGN LED 36 Pro™
©Elation Professional, Los Angeles Ca.
12
www.ElationLighting.com
Mounting
The Design LED 36 Pro™ is fully operational in any mounting position, hanging
upside-down, side mounted, or set on a flat level surface, etc. Be sure this fixture is kept at
least 0.5m (1.5 feet) away from any flammable materials (decoration etc.). When clamp
mounting; always use and install the supplied safety cable as an added safety measure to
prevent accidental damage in the event of a clamp failure.
See the image below.
Clamp Mounting
The Design LED 36 Pro™ provides a unique mounting bracket assembly that allows the unit
to stand on a flat surface or to be hung on truss via a clamp in any safe position (see the
illustration above). Regardless of the mounting option you choose please be sure to refer to
the safety guidelines in this manual to avoid damage to the unit and/or personal injury.
When mounting this fixture to truss be sure to secure an appropriately rated clamp to the
hanging yoke using a M10 screw fitted through the center hole of the hanging yoke. As an
Summary of Contents for 36 PRO
Page 2: ...DESIGN LED 36 Pro Elation Professional Los Angeles Ca 1 www ElationLighting com ...
Page 42: ...DESIGN LED 36 Pro Elation Professional Los Angeles Ca 41 www ElationLighting com ...
Page 43: ...DESIGN LED 36 Pro Elation Professional Los Angeles Ca 42 www ElationLighting com ...
Page 47: ...DESIGN LED 36 Pro Elation Professional Los Angeles Ca 46 www ElationLighting com ...