7
Cleaning And Maintenance
Removal Of Mineral Deposits
Always disconnect the appliance from the power outlet and cool
it down completely before cleaning.
1. Never immerse the kettle,power cord and power base in any
liquids, and allow moisture to contact with these parts.
2. Wipe the appearance of body with a damp cloth or cleaner,
never use a poisonous cleaner.
3. Remember to clean the filter at intervals. For easier cleaning,
detach the filter and then replace it after cleaning.
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners
to clean the outside of the kettle to prevent the gloss loss.
4. When not use or storage, the power cord may be wind under
the bottom of kettle.
Your kettle should be periodically descaled as the mineral
deposits in tap water may form scale at the bottom of kettle
interior so as to cause the operation less efficiency. You can use
the commercially available descaler and follow the instructions
on the package of descaler. Alternatively, you may follow the
below instructions to use the white vinegar.
1. Fill the kettle with 3 cups of white vinegar, then adding water to
the amount so as to cover the bottom of kettle completely. Leave
the solution in the kettle overnight.
2. Then discard the mixture in the kettle, then filling the kettle with
clean water, boiling and then discard the water. Repeat several
times until the odor of vinegar has been flushed away. Any stains
remaining inside the spout can be removed by rubbing with a
damp cloth.
