4
Control Panel Introduction
Before Using Your Kettle
Using Your Water Kettle
Buttons: “
”, “70
°
”, “80
°
”, “90
°
” , “100
°
” and “
”, total 6 buttons.
Instruction:
Temperature preset button: for presetting the keep-warm temperature (it
can choose 70
°
,80
°
,90
°
,3 options). 100
°
only for boiling.
“
” button: for cancelling the keep-warm function.
Display: LED indication
Display instruction:
1. Sleeping model: all of the LEDs turn off;
2. Standby mode:
2.1: Kettle being on the base, indicator of 100
°
and light bar are lighting;
2.2: Without kettle on the base, light bar blinks (once per second), other LEDs
turn off;
3. Working mode: Corresponding selected temperature indicator, indicator
of On/Off button and light bar are lighting;
4. Keep-warm mode: Corresponding selected temperature indicator,
indicator of Keep-warm button and light bar are lighting, while the indicator
of On/Off button turns off.
If you are using the kettle for the first time, it is recommended that you
should clean your kettle before use by boiling a full kettle of water twice
and then discarding the water. Wipe the surface with a damp cloth.
NOTE: The max capacity of kettle is 1.7L.
1. Place the kettle on the flat surface.
2. To fill the kettle, remove it from the power base and open the lid
by pressing the lid release button, then fill the kettle with the desired
amount of water, and close the lid. Alternatively, the kettle may be filled
through the spout. The water level should not exceed MAX marks or sit
below MIN level. Too little water will cause the kettle switching off before
the water has boiled.
NOTE: Do not fill the water over the maximum level, as water may spill
out of the spout when boiling. Ensure that the lid is firmly in place before
plugging the power outlet.
