5
Using Your Water Kettle
3. Plug into the power outlet, the light bar blinks.
4. Position the kettle on the power base, the light bar and the
indicator of 100
°
light up.
5. At that time, if you do not want to select the preset temperature,
you can press “
” button directly, then the kettle starts heating,
and it will boil the water to 100°C . During heating process, the
indicator of 100
°
C, the indicator of On/Off button and the light bar
keep illuminating. When the kettle finish heating, one beep can
be heard and the kettle will stop working automatically.
NOTE:
1) You can press “
” button to make the kettle stop heating
during heating process.
2) The appliance will enter into seelp mode if remove the kettle
from the power base or no any operation for more than 3 minutes
during heating process,at that time, replace the kettle on the
power base and press any button, then the appliance will enter
into standby mode.
3) Hold and press “
” button for 2 seconds, the appliance will
enter into sleep mode, and you can press any button to make
the appliance enter into standby mode.
6. And you can select the preset temperature by the
“Temperature preset button”. There are “70
°
” or “80
°
” and“90
°
” for
selection. After select the preset temperature, its corresponding
indicator illuminates, and then press “ ” button, the kettle starts
heating. When boiling the water to the preset temperature,
one beep can be heard, and the kettle will stop heating and
enter into keep-warm mode automatically. Then the kettle will
keep warm for 30 minutes. The selected preset temperature
indicator, the indicator of Keep-warm button and light bar keep
illuminating during keeping warm process. After finish keeping
warm, all the LEDs turn off and the appliance enters into sleep
mode, then you can press any button to make the appliance
enter into standby mode.
