E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
Page 40 © ELAN Home Systems 2009 • All rights reserved.
S86A
S86A Connections When NOT Using a
System Precision Panel
Sense Input Connections
Information from ELAN™SENSE Sensors connected to the S86A’s ELAN SENSE INPUTS is used to trigger events
that have been programmed into VIA! Touch Panels. To connect ELANSENSE Sensors directly to the S86A, sim-
ply plug the 3.5 mm stereo plug of the Sensor into the desired ELAN SENSE INPUT. If long runs are required,
the 3.5 mm stereo interconnect cable must be cut off and the cable extended using Cat-5. Utilize VIA!TOOLS or
ELANTOOLS Setup Software to create IR or serial command strings for automated functions. See the VIA!TOOLS or
ELANTOOLS Help file for additional information about programming Sense Inputs.
S86A
Figure 3-27: Sense Trigger Input Connections
