E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
Page 106 © ELAN Home Systems 2009 • All rights reserved.
S86A
Appendix D: Rack Mounting
RMK3 Rack-Mount Kit
When mounting the S86A controller in an equipment rack, use the optional RMK3 Rack Mount Kit for secure mount-
ing and proper ventilation. The RMK3 requires three rack spaces. To install the RMK3 into a standard 19” equipment
rack:
1. Slide the rack mount kit onto the S86A chassis from the front as shown in Figure D-1.
Figure: D-1
2. Ensure that the unit is flush with the front of the mounting kit. Install each of the eight screws (included) through
the side mounting flanges into the holes in the sides of the unit as shown in Figure D-2. Hand tighten screws!
Over-tightening could cause damage to the S86A Controller.
Figure: D-2.
3. Once the unit is securely mounted into the RMK3, install the entire assembly into a standard 19” equipment rack
from the front using four rack screws (not included).
19" Equipment Rack
Rack Screws
Figure: D-3.
