ELAD FDM-DUOr
Firmware Update - Rev. 1.1 - 07/2019
© 2019 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated
in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
3
1
RX and TX firmware update
To update the RX and TX firmware, you must remove the FDM-DUO top cover. Remove the four screws
in the FDM-DUO chassis bottom as shown in the figure below.
Then remove the top cover of the FDM-DUO
