Page 21 of 78
Fig. 9 SKC module
6.7.
SKC-A
The function of SKC-A modules is to supervise the service of
analog equipment controlled by 24VDC or 230VAC voltage
input. Such equipment can include fire damper actuators.
The modules are adapted for integration with LSK modules.
The modules are available in 2 versions, depending on
equipment operating voltage:
230V version - for equipment powered from ~230VAC mains
24V version - for equipment powered with 24VDC
The module can be configured for transmission at 230VAC,
24VDC voltage relay output, or as a potential-free output
only.
The module is configured in terms of output signal (230VAC
voltage, 24VDC voltage, potential-free signal) by the
manufacturer. Such setup can also be done by a trained
service operative. In such case, the manufacturer is not
responsible for service personnel errors.
Identification of SKC-A module. According to module
configuration, additional power supply and output data is
provided in the identification.
Identification of
SKC-A-XXX-YYY.
Where:
SKC-A – module type
-XXX – supply voltage
-
-230 – 230VAC power supply
-
-24 – 24VDC power supply
YYY- output type
-
-230 – 230VAC output
-
-24 – 24VDC output
-
-R – relay output
Summary of Contents for FPM+
