Specifications could be modified without any notification. Non-contractual document.
Copyright © 2018 ELA Innovation
User Guide SCIEL
READER IP2 04B.docx
12/18
Figure 19:
Authentication to Ethernet module
You should be asked for authenticating.
If your reader is set to factory settings, just click
OK
or press
Enter
on your keyboard.
Else, if you have already set a password that you don’t remember, you can reset the Lantronix module by pressing
the
Reset
button for more than 10 seconds (refer to
3.5 Reset button
) and restart the procedure from
4.2.1 Setup the
Lantronix Ethernet module
.
Figure 20:
Lantronix module configuration page
This is the main configuration page for the Ethernet module.
Unless you have very specific needs, you will only use two tabs:
Network
and
Serial Settings
, both surrounded with
red.
