EL GENS LPC P-cap Series User Manual Download Page 54

Page: 54 / 83

ELGENS CO., LTD

LPC P-cap Series User Manual

Save & Exit

▶

Save Changes and Reset

Save changes to CMOS and reset the system.

▶

Discard Changes and Exit

Abandon all changes and exit the Setup Utility.

▶

Discard Changes

Abandon all changes.

▶

Load Optimized Defaults

Use this menu to load the default values set by the motherboard manufacturer specifically for optimal

performance of the motherboard.

▶

Save as User Defaults

Save changes as the user’s default profile.

▶

Restore User Defaults

Restore the user’s default profile.

▶

Launch EFI Shell from filesystem device

This setting helps to launch the EFI Shell application from one of the available file system devices.

Summary of Contents for LPC P-cap Series




















































































Search results

Summary of Contents for LPC P-cap Series

Reviews:

Related manuals for LPC P-cap Series

Brands by name

Popular brands

EL GENS LPC P-cap Series, User Manual

Search results

Summary of Contents for LPC P-cap Series

Reviews:

Related manuals for LPC P-cap Series

Brands by name

Popular brands