EL GENS LPC P-cap Series, User Manual

Page: 49 / 83

ELGENS CO., LTD
LPC P-cap Series User Manual
49
▶
Console Redirection Settings
▶
Terminal Type
To operate the system’s con
sole redirection, you need a terminal supporting ANSI terminal
protocol and a RS-232 null modem cable connected between the host system and terminal(s).
This setting specifies the type of terminal device for console redirection.
▶
Bits per second, Data Bits, Parity, Stop Bits
This setting specifies the transfer rate (bits per second, data bits, parity, stop bits) of Console
Redirection.
▶
Flow Control
Flow control is the process of managing the rate of data transmission between two nodes. It’s the
process of adjusting the flow of data from one device to another to ensure that the receiving
device can handle all of the incoming data. This is particularly important where the sending
device is capable of sending data much faster than the receiving device can receive it.
▶
VT-UTF8 Combo Key Support
This setting enables/disables the VT-UTF8 combination key support for ANSI/VT100 terminals.
▶
Recorder Mode, Resolution 100x31
These settings enable/disable the recorder mode and the resolution 100x31.
▶
Legacy OS Redirection Resolution
This setting specifies the redirection resolution of legacy OS.
▶
Putty Keypad
PuTTY is a terminal emulator for Windows. This setting controls the numeric keypad for use in
PuTTY.
▶
Redirection After BIOS POST
This setting determines
whether or not to keep terminals’ console redirection running after the
BIOS POST has booted.