- 49 -
6.
取り付け方法 – AMD AM4 ソケット
ステップ 1:オリジナルのプラスチック
製ホールダウン式クランプを取り外す
(AMD)
図のように、ソケットの周りのオリジナルのプラスチ
ック製ホールダウン式クランプを固定している4個の
UNC 6-32のネジをプラスドライバーを使用して取り
外します。オリジナルのAMD® バックプレートはそ
のままにしておき、ホールダウン式クランプを取り外
して保管しておきます。パーツ識別に関する詳細に
ついては、図を参照してください。
ステップ 2:マウントスクリューの取り付
け(AMD)
AMD AM4ソケット用のマウントサムスクリュー4個
をマザーボードに取り付けます。 ネジはプライヤな
どの工具を使わずに取 り付けられます。
固定クランプ
UNC 6-32ネジ
ステップ 3:ラジエーターにファンを取り
付ける (AMD)
UNC 6-32 x 30mmのネジを使用してファン1個、2
個、または3個(AIOのバージョンによる)をラジエー
ターに取り付けます。
UNC
6-32 x 30 mm
ファン
ラジエーター
ステップ 5:マウントブラケットの取り付
け(AMD)
M4x4のネジを4個使用して、AMD用ブラケット2個
をポンプユニットに取り付けます。
塗布済みの放熱グリスに触れたり、損傷したりしな
いようご注意ください。
M4x4
AMD マウント
ブラケット
ステップ4:コールドプレート保護カバー
の取り外し (AMD)
ポンプユニットの背面から保護カバーを取り外しま
す。保護カバーは、コールドプレートおよびコールド
プレートに予め塗布された放熱グリスを損なわない
ようにするためのものです。
保護カバーを取り外して取り付けを行う際、予め塗
布された放熱グリスに触れたり、損傷したりしない
ようご注意ください。
ステップ 6:ポンプユニットの取り付け
(AMD)
CPUの接触面を拭きます(サンプル画像のように、
非研磨布または綿棒を使用)。
図のように、ポンプユニットをマウントスクリューと
CPUに合わせます。
付属の圧縮スプリングとサムナットをマウントスクリ
ューの上に置きます(4個)。一度に2個のサムナット
をできれば対角に締め始めますが、完全にねじ込ま
ないように注意してください。
サムスナット
スプリング
研磨布以外
IHS
保護カバー
塗布済みのサー
マルグリース
INTEL LGA 115x /
AMD AM4 ソケット
用マ ウントサムスク
リュー
Summary of Contents for EK-AIO 120 D-RGB
