ekwb EK-AIO 120 D-RGB, Installation Manual

Page: 10 / 84

- 10 -
Step 8: Pump – connecting cables
(AMD)
D-RGB
Connector
VDG Connector
4-pin Connector
Step A:
Plug the 4-pin PWM connector of the pump to
the motherboard.
D-RGB Header
RGB Header
Step B:
Plug the 3-pin connector of the pump D-RGB
LED light to the D-RGB HEADER on the
motherboard. The LED will work if the pin
layout on the header is as follows: +5V, Digital,
Empty, Ground. With some motherboards, you
can alternatively use a VDG connector instead
of a D-RGB to connect the LED.
Please ensure that the arrow
indicated on the connector is
plugged into the +5V line as
indicated on your motherboard. If
you put LED Diode to the 12V RGB
HEADER you can damage the LEDs.
Connector is the same on D-RGB
and RGB versions, but D-RGB
version has 3 cables from connector
to PCB; RGB version has 4 cables. If
you connect D-RGB led to ordinary
RGB header you can damage your
motherboard or LED strip.
Step 7: Installing the assembly of fans
and the radiator into a PC case (AMD)
Attach the assembly of the radiator and the
fan(-s) to the PC case with the UNC 6-32 x
6mm screws.
UNC 6-32 x 6 mm
(4x)
UNC 6-32 x 6 mm
(8x)
UNC 6-32 x 6 mm
(12x)
EK-AIO 120 D-RGB
EK-AIO 240 D-RGB
EK-AIO 360 D-RGB