- 10 -
STEP 1
To enable the functioning of the cooling solution, please take the two
cables from the water block and connect them to connectors on the
Controller box:
- Thermal sensor - 2-pin smaller white connector
- TEC plate power supply - 2-pin black connector
The connectors can be inserted in one orientation only!
Make sure not to use excessive force. It may cause permanent damage!
STEP 1
Thermal sensor
TEC Plate connector
ELECTRICAL CONNECTIONS
CABLING AND ELECTRICAL CONNECTIONS
The liquid cooling solution includes a condensation controller that
requires the following connections:
• 12V ATX power (using a 1x PCIe 8-pin GPU power cable directly
from the power supply)
• 2-pin connector between the water block and the controller
(factory connected)
• 2-pin sensor connector (factory connected)
• USB connection (the cooler has a micro USB port that needs to
be connected to the motherboard’s internal USB header or to an
available USB port. The USB cable is included
