- 9 -
INSTALLATION OF THE CONTROLLER BOX TO THE WATER BLOCK (OPTIONAL)
You can install the controller box somewhere else in the chassis.
Please make sure that the cables for TEC plate and temperature
sensor are long enough to allow to do so. EK recommends you
secure the Controller box to the water block, as shown in the
following Steps.
STEP 1
Prepare the water block and remove the two (2) round-headed black
screws – M4 ISO 7380.
Screw M4 ISO 7380
STEP 1
STEP 2
STEP 2
Prepare the Controller box and align the side holes with M4 threaded
holes in water block top. Secure them using the screws which were
removed in step 1.
